Possible issue with running more than one RSP1a

[Phil-NY4Q]

I am seeing this upon startup if I try to use more than one RSP1a.

Code Select Expand

2026-01-10T11:54:06.996194Z  INFO novasdr-dsp-rx1 ThreadId(08) novasdr_server::dsp_runner: DSP thread started receiver_id=rx1
2026-01-10T11:54:06.996210Z  INFO            main ThreadId(01) novasdr_server::app: server listening bind=[::]:80
2026-01-10T11:54:06.996274Z  INFO novasdr-dsp-rx0 ThreadId(09) novasdr_server::dsp_runner: DSP thread started receiver_id=rx0
[INFO] devIdx: 0
[INFO] SerNo: 18070E4096
[INFO] hwVer: 255
[INFO] rspDuoMode: 0
[INFO] tuner: 1
[INFO] rspDuoSampleFreq: 0.000000
[INFO] Using format CS16.
[INFO] devIdx: 0
[INFO] SerNo: 19110CDF97
[INFO] hwVer: 255
[INFO] rspDuoMode: 0
[INFO] tuner: 1
[INFO] rspDuoSampleFreq: 0.000000
[ERROR] SelectDevice Error: sdrplay_api_Fail
2026-01-10T11:54:07.088402Z ERROR novasdr-dsp-rx0 ThreadId(09) novasdr_server::dsp_runner: DSP loop terminated receiver_id=rx0 error=open SoapySDR device

Caused by:
    Other: SelectDevice() failed

I am concerned at the devIdx: 0 being on both receivers.

Phil

[Phil-NY4Q]

I am going to remove the SDRplay API v 3 and move back to v2 and try that.

[Bas ON5HB]

This is an SDRplay problem, it should not matter how fast Nova sends commands to Soapy.
I had the same problems before with the RSP-TCP server.
This is a problem of SDRplay.

Their API is buggy. V2.13 has the same problems, so I wonder if the chip has a problem.
As I have seen it many times, the chip just stops responding until you remove USB and plug it back in.

[Phil-NY4Q]

This is an SDRplay problem, it should not matter how fast Nova sends commands to Soapy.
I had the same problems before with the RSP-TCP server.
This is a problem of SDRplay.

Their API is buggy. V2.13 has the same problems, so I wonder if the chip has a problem.
As I have seen it many times, the chip just stops responding until you remove USB and plug it back in.

There's lots of info here too pointing to the SDRPlay API and this exact issue.

https://groups.io/g/SDRPlayUsers/topic/selectdevice_error/104335929

[tuvok]

hm .. i have on the old websdr.org Server the 2.30API ..
but on the New SDR i can not run the SDRplay and i have no idea.